A Review Of flareless fitting

A Review Of flareless fitting

Blog Article

Like all steel-to-metallic tube fitting units, the SAE flareless is restricted in the quantity of disassemblies and reassemblies the tubing can endure since the ferrule bites further and further to the tubing wall with each reassembly.

The midsection of your sleeve driving the main edge incorporates a slight bow to offer contact with the internal taper of your fitting system and variety a sealing level.

"A" and "B" variations (see tube sleeve drawings to check out the "A" and "B" type sleeves). Following machining and inspection

Flareless compression fittings are applied with metal tubing. These fittings call for no flaring on the steel tube to setup. Employing a ferrule (ring) to compress on to tubing these fittings sort a high tension seal ready to deal with several Many psi.

For more than twenty five a long time OmegaOne has made stainless-steel tube fittings and pipe fittings to be used in many different hydraulic programs. OmegaOne stainless-steel fittings […]

WARNING: This products can expose you to definitely chemical substances including guide and/or DEHP and/or carbon black, that happen to be regarded to the State of California to result in cancer or beginning defects or other reproductive harm.  For more information head to

"  The look in the SAE flareless single biting ferrule holds The true secret to this superiority. The ferrule bows throughout assembly and "bites" in to the tubing wall. The spring-action joint offers top-quality shock absorption and Keeping electrical power.

If you have any questions on any of our goods or services, don’t be reluctant to offer us a contact. For any inquiries, complete the form and among our Hy-Lok representative will Call you soon.

On dynamic hydraulic methods, the SAE flareless tube fitting is suggested around other flareless tube fitting techniques, precisely compression, or "instrumentation." The design of kp-lok your SAE flareless one biting ferrule retains The true secret to this superiority. The ferrule bows through assembly and "bites" into the tubing wall.

SSP SAE flareless or “Chunk type”  tube fitting verified structure is applied around the globe for over sixty a long time in a great number of applications during the air, on ground, and at sea.

Mechanical Keeping power is achieved by the "Chunk" to the tube leading to displaced metal to generally be pushed up right into a "wall" forward on the bite. This "wall" stops the tube from blowing out. The quantity of drive that is performing to thrust the tube out is calculated by multiplying technique strain from the cross portion place on the tube. For instance, blowout drive over a 1/two" OD tube at one thousand psi static tension is 197 lbs.

There's a slight indentation throughout the conclusion with the tube (E) that indicates the tube was bottomed during the fitting in the course of presetting (if proof of the complete Make contact with isn't obvious the ferrule might not be appropriately preset).

Keep away from rotating the ferrule. Steel ferrules shouldn't be capable of going backwards and forwards together the tube past the Chunk region (a chrome steel ferrule will transfer much more than steel thanks to it’s spring back features).

Flareless nuts have a gray seem due to molly coating apply assisted to increase the regimen on the nut. All F sequence Flareless fittings are generated from 316 stainless-steel.

Report this page